Overview
Grill-less 2 Speed Fan
Break the heat and bring on the airflow with Ultimate, the best choice in compact fans on the market. Unlike larger fans, Ultimate provides relief where it's needed using a low power draw, two speed settings, a whisper quiet motor and grill-free FingerSafe blades. Its minimalistic design is custom crafted to fit in tight spaces, and its adjustable tilting head allows you to steer airflow in your direction.
Key Features & Benefits:
- Grill-less and whisper quiet
- Shock-absorbing FingerSafe blade
- 2 speeds with a low power-draw motor
- Includes a permanent screw-down mount
- Wires directly to your boat's electrical system
- 1-Year Warranty
- Made in Canada
- Product dimensions: 5.25" x 2.5" x 8.0" (133 mm x 63.5 mm x 203 mm)
| Weight (LBS) | 1.37 |
|---|---|
| Pack Size | EA |
| UOM | EA |
| UPC | 062503757010 |
| CFM | 200 |
| Product Colour | Black |
| Power Supply (V) | 12 V |
| Speed Settings | 2 |
| Current Draw on Low | 0.28A |
| Current Draw on High | 0.41A |
| Airflow on Low | 150 CFM |
| Airflow on High | 200 CFM |
| Connection Type | Direct Wire |
| Limited Warranty | 1 Year |
Write Your Own Review
1. Do your fans have a CSA or UL rating?
Our marine fans are low-voltage fans that do not plug into the grid; therefore, they do not require CSA or UL certifications.
2. What is the cylinder-shaped component of the cord?
The part that you are referring to is a ferrite bead. The ferrite bead is required to meet Electromagnetic immunity and emission compliance requirements by the Canadian Standards Association (CSA) and must not be removed. Without this ferrite bead, other electronic devices near the fan may experience electromagnetic interference when operating. This will vary with the specific equipment and proximity to the fan. You can cut the heat shrink tubing off to eliminate some of the bulk surrounding the ferrite. Arrange the wires so that two are on the side and one is on the opposite side. This will allow it to lay flatter.
3. My product has a 12-volt lighter plug included. Can I cut it off and direct wire it?
Yes. Please ensure that the smooth cord wire (with writing) is attached to the negative (ground) wire and that the ribbed cord wire is connected to the positive (red) wire.
Related Products
